New @ CLC!

Boat Plans

Builders' Forum Archives (before April 2008)

901-920 out of 10487 results displayed.

Thick epoxy by Kim on Jan 13, 2007

Replies:

Re: Thick epoxy by Jim E on Jan 14, 2007
- Re: Thick epoxy by Kim on Jan 14, 2007

New CNC Machine Arrives by CLC on Jan 12, 2007

Replies:

Re: New CNC Machine Arriv by Peter on Jan 12, 2007
- Re: New CNC Machine Arriv by CLC on Jan 12, 2007
  - by on
Re: New CNC Machine Arriv by Mac on Jan 12, 2007
- Re: New CNC Machine Arriv by Kyle Hamilton on Jan 13, 2007
  - Re: New CNC Machine Arriv by Woodie on Jan 13, 2007
Re: New CNC Machine Arriv by Laszlo on Jan 13, 2007

ShopCam by Peter on Jan 12, 2007

Replies:

Re: ShopCam by Jim E on Jan 12, 2007

bulkhead wood by Ron on Jan 12, 2007

Replies:

Re: bulkhead wood by Tom on Jan 12, 2007
Re: bulkhead wood by Charlie on Jan 12, 2007
Re: bulkhead wood by Alan Speakman on Jan 13, 2007

Painting Annapolis Wherry by Chris on Jan 11, 2007

Replies:

Too much of a good thing by CLC on Jan 11, 2007
- Re: Too much of a good th by Camper on Jan 12, 2007
  - Re: Too much of a good th by David on Jan 17, 2007
- Re: Too much of a good th by Chris on Jan 20, 2007
  - Re: Too much of a good th by David Warren on Jan 21, 2007

Sanding into weave by Mike on Jan 10, 2007

Replies:

Re: Sanding into weave by George K on Jan 10, 2007
- Re: Sanding into weave by Patrick Forrester on Jan 10, 2007
  - Re: Sanding into weave by John S. Short on Jan 11, 2007
First, I see some hard by Charlie Jones on Jan 10, 2007
Re: Sanding into weave by gober on Jan 10, 2007
Re: Sanding into weave by Laszlo on Jan 10, 2007
- Re: Sanding into weave by Mike on Jan 10, 2007
- Sharp grit on paper by Robert N Pruden on Jan 11, 2007
  - Re: Sharp grit on paper by Walt on Jan 11, 2007
    - Re: Sharp grit on paper by Mac on Jan 11, 2007
      - Re: Sharp grit on paper by Robert N Pruden on Jan 11, 2007
    - scrappers by Robert N Pruden on Jan 11, 2007
    - that's what I said by Charlie Jones on Jan 12, 2007
Re: Sanding into weave by Patrick Forrester on Jan 10, 2007
- In defense of 60 grit by George K on Jan 11, 2007
  - Re: In defense of 60 grit by Patrick Forrester on Jan 20, 2007
Re: Sanding into weave by Dave Houser on Jan 11, 2007
Re: Sanding into weave by LeeG on Jan 22, 2007
- Re: Sanding into weave by Mike on Jan 22, 2007
  - Re: Sanding into weave by Kim on Jan 22, 2007
    - Re: Sanding into weave by George K on Jan 22, 2007
      - Re: Sanding into weave by Mike on Jan 22, 2007
        
        Re: Sanding into weave by George K on Jan 22, 2007
      - Re: Sanding into weave by Kim on Jan 22, 2007
        
        Re: Sanding into weave by Mike on Jan 22, 2007

How wide a paddle slot? by Brian Cunningham on Jan 9, 2007

Replies:

Re: How wide a paddle slo by CLC on Jan 9, 2007
- Since it's brand new by Charlie Jones on Jan 9, 2007
  - I'd like to by Brian Cunningham on Jan 9, 2007
- True, but I'd rather not by Brian Cunningham on Jan 9, 2007
Re: How wide a paddle slo by Jim E on Jan 9, 2007
Re: How wide a paddle slo by Alan Speakman on Jan 10, 2007
Re: alternative... by don on Jan 10, 2007
Re: How wide a paddle slo by Warren on Jan 10, 2007
- Canoe Paddle hiking board by Brian Cunningham on Jan 11, 2007
  - Re: Canoe Paddle hiking b by Camper on Jan 11, 2007
    - Years old stuff by Brian Cunningham on Jan 11, 2007
    - Sculling by Jim E on Jan 11, 2007
Re: How wide a paddle slo by george jung on Jan 10, 2007
- hulls are done by Brian Cunningham on Jan 11, 2007
  - Re: hulls are done by Warren on Jan 12, 2007
    - displacements same by Brian Cunningham on Jan 12, 2007

Paddling report by George K on Jan 9, 2007

Replies:

Re: Paddling report by John F on Jan 9, 2007
- Another Paddling report by Andrew Sommer on Jan 9, 2007
Robert's Response ... by Robert N Pruden on Jan 11, 2007
- Re: Robert's Response ... by Camper on Jan 11, 2007
- Re: Robert's Response ... by John S. Short on Jan 11, 2007
- Re: Robert's Response ... by George K on Jan 11, 2007
  - *muffled grumbling* by Robert N Pruden on Jan 11, 2007
    - Re: *muffled grumbling* by George K on Jan 12, 2007

Footbrace installation by Rick Langer on Jan 8, 2007

Replies:

Re: Footbrace installatio by Garland on Jan 8, 2007
- Re: Footbrace installatio by Jim E on Jan 8, 2007
  - Re: Footbrace installatio by Rick Langer on Jan 9, 2007
  - Re: Footbrace installatio by Laszlo on Jan 9, 2007
    - Re: Footbrace installatio by John F on Jan 9, 2007
      - Re: Footbrace installatio by Kyle T on Jan 9, 2007

reglassing hull bottom by Patrick Forrester on Jan 7, 2007

Replies:

Re: reglassing hull botto by Jim E on Jan 8, 2007
Re: reglassing hull botto by Brad Shook on Jan 8, 2007
- Re: reglassing hull botto by John Beck on Jan 9, 2007
  - Re: reglassing hull botto by LeeG on Jan 14, 2007
Re: reglassing hull botto by Dave Houser on Jan 9, 2007
what weight of glass ? by LeeG on Jan 14, 2007

Chester Yawl Conversion? by James Pallafox on Jan 6, 2007

Replies:

Re: Chester Yawl Conversi by John R. Pollard on Jan 6, 2007
Re: Chester Yawl Conversi by CLC on Jan 6, 2007
- Re: Chester Yawl Conversi by Camper on Jan 8, 2007
  - Re: Chester Yawl Conversi by CLC on Jan 9, 2007
Re: Chester Yawl Conversi by James Pallafox on Jan 7, 2007
- Re: Chester Yawl Conversi by Laszlo on Jan 7, 2007
  - Re: Chester Yawl Conversi by John R. Pollard on Jan 7, 2007
    - Re: Chester Yawl Conversi by James Pallafox on Jan 7, 2007
      - Re: Chester Yawl Conversi by Greg Swarthout on Jan 7, 2007
        
        Re: Chester Yawl Conversi by James Pallafox on Jan 7, 2007

Doug Rhude by CaptJack on Jan 5, 2007

No Replies.

Final epoxy coat by Kim on Jan 5, 2007

Replies:

Re: Final epoxy coat by Jim E on Jan 5, 2007
Re: Final epoxy coat by Mac on Jan 6, 2007
- Re: Final epoxy coat by Kim on Jan 6, 2007
Re: Final epoxy coat by Alan Speakman on Jan 6, 2007
- Re: Final epoxy coat by George K on Jan 6, 2007
- Re: Final epoxy coat by Jim E on Jan 6, 2007
  - Re: Final epoxy coat by Alan Speakman on Jan 7, 2007
- Re: Final epoxy coat by gober on Jan 6, 2007
  - Re: Final epoxy coat by Kim on Jan 6, 2007
    - Re: Final epoxy coat by Kim on Jan 16, 2007
      - Re: Final epoxy coat by Jim E on Jan 16, 2007
      - Re: Final epoxy coat by Mac on Jan 16, 2007
        
        Re: Final epoxy coat by Kim on Jan 16, 2007

Cleaning Epoxy Pumps by Rick Langer on Jan 5, 2007

Replies:

Re: Cleaning Epoxy Pumps by John F on Jan 5, 2007
- Re: Cleaning Epoxy Pumps by Rick Langer on Jan 5, 2007
  - Re: Cleaning Epoxy Pumps by LeeG on Jan 6, 2007
Re: Cleaning Epoxy Pumps by Jim E on Jan 5, 2007
- Re: Cleaning Epoxy Pumps by CLC on Jan 5, 2007
  - Re: Cleaning Epoxy Pumps by John F on Jan 9, 2007

Blend/feathering glass by Mike on Jan 5, 2007

Replies:

Re: Blend/feathering glas by George K on Jan 5, 2007
- Re: Blend/feathering glas by Mike on Jan 5, 2007
  - Re: Blend/feathering glas by Mac on Jan 5, 2007
  - Re: Blend/feathering glas by George K on Jan 6, 2007

Hybrid Cockpit Form Tips by John Beck on Jan 4, 2007

No Replies.

Cheap tools/wire by Richard K on Jan 4, 2007

Replies:

Re: Cheap tools/wire by Chris J. on Jan 4, 2007
- Re: Cheap tools/wire by Andrew Sommer on Jan 5, 2007
  - Re: Cheap tools/wire by David Warren on Jan 6, 2007
    - Re: Cheap tools/wire by David Warren on Jan 6, 2007

Nice Going, CLC by Doug Judd on Jan 4, 2007

Replies: