Builders' Forum Archives |
Re: fitting bulkheads
Posted by Chris F on May 24, 2004
I was there last week with my 16LT. I probably trimmed 1/2 to 3/4 inch from the front bulhead to get it approx where it should be. My unclean cuts were masked by the fillet. It will also mask your aft gaps.
What had me scratchin my head and unsure of myself was that the front deckbeam is going to need serious adjustment also. I going on the asumption that in the end so long as the right curve is achieved for the deck.
-Chris
In Response to: fitting bulkheads by Wade Bick on May 24, 2004
Replies:
- Re: fitting bulkheads by Clyde HOhn on May 24, 2004
- Re: fitting bulkheads by Peter on Jun 22, 2004
-
Re: fitting bulkheads by Kurt Maurer on Jun 22, 2004
- Re: fitting bulkheads by Joe Lombardo on Jun 22, 2004
- Re: fitting bulkheads by Allan Reade on Jun 22, 2004
- Re: fitting bulkheads by Joe Lombardo on Jun 22, 2004
-
Re: fitting bulkheads by Kurt Maurer on Jun 22, 2004