Re: Soft Webbing Loops

Posted by John in Dallas on May 27, 2004

> ...each slot costs me about five minutes time

: using a drill, then a hacksaw blade with

: 100-grit sandpaper stuck to it.

Ah, Kurt, great minds think alike. That's exactly how I do my slots. Drill, a little bonsai saw and then sandpaper stuck to a hacksaw blade with contact cement.

Glueing 60 grit paper to scrap strips makes a great rasp too, as you probably know!

John

In Response to: Re: Soft Webbing Loops by Kurt Maurer on May 26, 2004

Replies:

• Re: Soft Webbing Loops by Doug Judd on May 27, 2004