Re: Sassafras 16 rocker

Posted by CLC on Jul 14, 2006

The Sassafras should have about 1.5" of rocker. Check and see if the sawhorses are spaced too far apart: that can induce rocker. Or, reducing the boat's maximum beam by a small amount will reduce the rocker by a lot.

We're building a stock Sassafras 16 in the shop this very moment and it's got about 1.5" of rocker.

In Response to: Sassafras 16 rocker by Joe McElroy on Jul 14, 2006


No Replies.