Builders' Forum Archives |
Re: Deck lines
Posted by Doug Judd on Dec 28, 2006
It's very similar to the soft pad eye method shown on my CH16. I melted and flattened the free end of the web loops to more or less conform to the underside of the deck. The slots have been sealed with epoxy and are a tight fit. Pull the webbing through and seal the inside with an RTV (silicone) sealant.
In Response to: Re: Deck lines by Jim E on Dec 27, 2006
Replies:
- Re: Deck lines by Denis Royer on Dec 28, 2006
- Re: Deck lines by Rick Langer on Dec 30, 2006