Lug Rig Passagemaker Boom/Yard Shaping

I have finally got to this point working on the spars.

I thought I would post a photo of the yard. It is shaped and close to receiving first sealer varnish coat.

I have not seen any photos so for those that are reaching this point here is how mine looks.  I did put a 3/8 radius on edges instead of the 1/2 inch mentioned in the manual.

I went with 1/4 inch radius on the mast.


No replies have been added to this post.

« Previous Post     List of Posts     Next Post »

Please login or register to post a reply.