I am building an Oxford, and trying to keep it as light as possible. I bought some tubes of Woodzilla with the intend to use it for fillets. However, I am having second thoughts. Has anyone done this or have arguments for or against?
» Submitted by fishndaflats - Sun, 4/27/14 » 10:32 PM
is it compatible with epoxy? Hate to see one to fillet the boat and go to put the glass and the epoxy wont stick in the fillets. Do a test, put a glob of woodzilla smooth it out about 1/8 in thick, let it dry. Sand, rough it up, and apply small strip of glass, say 2"x2" let dry. Then try to pull it apart.
RSS
RE: Woodzilla fillets
» Submitted by fishndaflats - Sun, 4/27/14 » 10:32 PM
is it compatible with epoxy? Hate to see one to fillet the boat and go to put the glass and the epoxy wont stick in the fillets. Do a test, put a glob of woodzilla smooth it out about 1/8 in thick, let it dry. Sand, rough it up, and apply small strip of glass, say 2"x2" let dry. Then try to pull it apart.