Boatbuilding Supplies » Customize Your Boat |
The finishing touches that make your boat your very own include decorative elements ranging from a the subtle grace note of an inlaid or onlaid design to big, bold custom vinyl graphics. CLC can help!
Thinking about stain? Or using carbon fiber? Maybe adding a custom rub strip? In addition to the products, our Shop Tips can help you with your application questions, too.
Custom Wood Nameplate - Laser-Cut Inlay/Onlay
Mount an elegant custom wooden nameplate on the boat you've built! These 2" x 3" oval plates are cut with your boat and your name laser-engraved. You can epoxy the nameplate anywhere on the boat you like, for example, the deck or aft...
from $27.00
Mount an elegant custom laser-engraved wooden nameplate on the boat you've built! Your boat's name will be laser-engraved from 1/16-inch Cherry material. We have two sizes to choose from. Make your selection from the dropdown....
from $27.00
CLC Builder Logo Marquetry Inlay/Onlay
Laser-cut and engraved inlays or onlays of the CLC Builder Logo cut from an Okoume veneer. We have two sizes to choose from. Make your selection from the dropdown. Large: 11-3/4" x 2-11/16" (1/16" thick) Small: 5-7/8" x...
from $19.80
Bimini Top for Southwester Dory
Ready to Assemble Bimini Top. Ideal for boats like the Southwester Dory. Made from Sun-DURA® 100% solution-dyed marine-grade 7.6oz Denier polyester, with 100% Polyurethane finish coating. The fabric offers excellent...
from $489.00
Mount an elegant custom wooden nameplate on the boat you've built! These banner plates are cut with your boat name laser-engraved. We have two sizes to choose from. Make your selection from the dropdown. Small: 2.25" x...
from $27.00
Ready to Assemble Bimini Top. Ideal for boats like the Jimmy Skiff II. Made from Sun-DURA® 100% solution-dyed marine-grade 7.6oz Denier polyester, with 100% Polyurethane finish coating. The fabric offers excellent UV...
from $495.00
CLC Paddler Logo Marquetry Inlay/Onlay
Laser-cut and engraved inlays or onlays of the CLC Paddler Logo cut from an Okoume veneer. We have two sizes to choose from. Make your selection from the dropdown. Large: 5-7/8" x 4-7/16" (1/16" thick) Small: 3" x 2-3/16" (1/16"...
from $22.50
Mohawk - Ultra® Penetrating Stain
This dye-type stain is ideal for projects that will eventually be sealed with epoxy (stain must be applied prior to epoxy coating). Mohawk Ultra® Penetrating Stain combines superior transparency with excellent fade resistance. Easy...
from $35.14
Personalize your wooden boat with these laser-cut veneer onlays. See our Shop Tip for the scoop on how to install your own. The whale is 5" wide and about 2" tall, and made of cherry veneer.
$24.99
Personalize your wooden boat with these laser-cut veneer onlays. See our Shop Tip for the scoop on how to install your own. The crab is 6" wide and about 5" tall and made of Sapelle vaneer.
$24.99
Dolphin Onlays (small) - Set of Two
Personalize your wooden boat with these laser-cut veneer onlays. See our Shop Tip for the scoop on how to install your own. This is a mirrored pair of dolphins that are 5" wide and about 3" tall, made of walnut...
$24.99
Dolphin Marquetry Inlay/Onlay Kit
Personalize your wooden boat with these laser-cut veneer inlays or onlays. Woods include walnut, holly, cherry, and ebony. Designs are epoxied together so you don't lose the tiny hand-assembled bits. All designs are 6-1/2" in diameter. See...
$55.00
Personalize your wooden boat with these laser-cut veneer onlays. See our Shop Tip for the scoop on how to install your own. The gecko is 5" wide and about 2" tall, and made of sapele veneer. This fun little...
$24.99
Personalize your wooden boat with these laser-cut veneer onlays. See our Shop Tip for the scoop on how to install your own. The sea turtle is 5" by 5" and made of Sapelle vaneer.
$24.99
This is a retrofittable kit, to contain wear at the bow and stern on kayaks, made up out of several layers of super-tough Dynel fabric bedded in graphite-filled epoxy. Works on wood-epoxy boats and solid fiberglass boats. Select a rubstrip kit...
from $9.00
Custom Vinyl Boat Lettering - White
Every wooden boat has a story, as they say, and every boat deserves a proper name. Have you admired a beautifully lettered name on a boat? It was almost certainly custom-cut vinyl. We have purchased a fancy CNC...
from $2.00
Custom Vinyl Boat Lettering - Black
Every wooden boat has a story, as they say, and every boat deserves a proper name. Have you admired a beautifully lettered name on a boat? It was almost certainly custom-cut vinyl. We have purchased a fancy CNC letter-cutter and can...
from $2.00
Custom Vinyl Boat Lettering - Red
Every wooden boat has a story, as they say, and every boat deserves a proper name. Have you admired a beautifully lettered name on a boat? It was almost certainly custom-cut vinyl. We have purchased a fancy CNC letter-cutter and can...
from $2.00
Custom Vinyl Boat Lettering - Blue
Every wooden boat has a story, as they say, and every boat deserves a proper name. Have you admired a beautifully lettered name on a boat? It was almost certainly custom-cut vinyl. We have purchased a fancy CNC...
from $2.00
Custom Vinyl Boat Lettering - Dark Blue
Every wooden boat has a story, as they say, and every boat deserves a proper name. Have you admired a beautifully lettered name on a boat? It was almost certainly custom-cut vinyl. We have purchased a fancy CNC...
from $2.00
Custom Vinyl Boat Lettering - Gold
Every wooden boat has a story, as they say, and every boat deserves a proper name. Have you admired a beautifully lettered name on a boat? It was almost certainly custom-cut vinyl. We have purchased a fancy CNC...
from $2.00
Custom Vinyl Boat Lettering - Yellow
Every wooden boat has a story, as they say, and every boat deserves a proper name. Have you admired a beautifully lettered name on a boat? It was almost certainly custom-cut vinyl. We have purchased a fancy CNC...
from $2.00
Custom Vinyl Boat Lettering - Green
Every wooden boat has a story, as they say, and every boat deserves a proper name. Have you admired a beautifully lettered name on a boat? It was almost certainly custom-cut vinyl. We have purchased a fancy CNC letter-cutter and can...
from $2.00
We used lot of this building the 31-foot Proa "Madness". Just the thing for high-strength, high-modulus reinforcement, and it looks cool, too. 3" wide, 5.7 ounce weight. This is American Made 3" inch wide Plain Weave 100% Carbon...
from $15.92
