Boatbuilding Supplies » Inlays & Onlays |
Seal these laser-cut veneer inlays or onlays beneath the epoxy on your wooden boat for an extra grace note. Woods include walnut, holly, cherry, and ebony. All designs are 6-1/2" in diameter except where specified.
Custom Wood Nameplate - Laser-Cut Inlay/Onlay
Mount an elegant custom wooden nameplate on the boat you've built! These 2" x 3" oval plates are cut with your boat and your name laser-engraved. You can epoxy the nameplate anywhere on the boat you like, for example, the deck or aft...
from $27.00
Mount an elegant custom wooden nameplate on the boat you've built! These banner plates are cut with your boat name laser-engraved. We have two sizes to choose from. Make your selection from the dropdown. Small: 2.25" x...
from $27.00
CLC Paddler Logo Marquetry Inlay/Onlay
Laser-cut and engraved inlays or onlays of the CLC Paddler Logo cut from an Okoume veneer. We have two sizes to choose from. Make your selection from the dropdown. Large: 5-7/8" x 4-7/16" (1/16" thick) Small: 3" x 2-3/16" (1/16"...
from $22.50
Mount an elegant custom laser-engraved wooden nameplate on the boat you've built! Your boat's name will be laser-engraved from 1/16-inch Cherry material. We have two sizes to choose from. Make your selection from the dropdown....
from $27.00
CLC Builder Logo Marquetry Inlay/Onlay
Laser-cut and engraved inlays or onlays of the CLC Builder Logo cut from an Okoume veneer. We have two sizes to choose from. Make your selection from the dropdown. Large: 11-3/4" x 2-11/16" (1/16" thick) Small: 5-7/8" x...
from $19.80
Dolphin Marquetry Inlay/Onlay Kit
Personalize your wooden boat with these laser-cut veneer inlays or onlays. Woods include walnut, holly, cherry, and ebony. Designs are epoxied together so you don't lose the tiny hand-assembled bits. All designs are 6-1/2" in diameter. See...
$49.50
Dolphin Onlays (small) - Set of Two
Personalize your wooden boat with these laser-cut veneer onlays. See our Shop Tip for the scoop on how to install your own. This is a mirrored pair of dolphins that are 5" wide and about 3" tall, made of walnut...
$22.49
Personalize your wooden boat with these laser-cut veneer onlays. See our Shop Tip for the scoop on how to install your own. The whale is 5" wide and about 2" tall, and made of cherry veneer.
$22.49
Personalize your wooden boat with these laser-cut veneer onlays. See our Shop Tip for the scoop on how to install your own. The sea turtle is 5" by 5" and made of Sapelle vaneer.
$22.49
Personalize your wooden boat with these laser-cut veneer onlays. See our Shop Tip for the scoop on how to install your own. The gecko is 5" wide and about 2" tall, and made of sapele veneer. This fun little...
$22.49
Personalize your wooden boat with these laser-cut veneer onlays. See our Shop Tip for the scoop on how to install your own. The crab is 6" wide and about 5" tall and made of Sapelle vaneer.
$22.49
Sticker - Kaholo Paddleboards by Chesapeake Light Craft
We have had so many compliments on our Kaholo Paddleboard branding that we have created a logo sticker! Now you can adorn your Kaholo SUP, car, or boat with the 5-1/2" x 2" diamond-shaped sticker. The material is designed for outdoor...
from $1.80
