Overview
The Expedition Kit includes the marine plywood parts, sheer clamps, fiberglass, epoxy resin, and all other components necessary for building the boat. The sliding seat system is sold separately.
Plans are required for building this kit. They can be purchased from Angus Rowing's digital plans page. 
Kit Contents:
- CNC Cut Okoume (BS1088) Marine Plywood Components (See Diagram of Cut Components, above)
- Sheer Clamps
- 2 gallons Epoxy Resin
- 1 gallon Epoxy Hardener
- 14 yards Fibreglass Cloth 6oz (50" wide)
- 20 yards Fibreglass Tape 6 oz 3" wide
- 3 lbs Wood Flour
- 1 quart Microballoons (Profill)
- 2 Syringes
- 30 Epoxy Measuring containers 12 oz
- 10 Epoxy Measuring containers 24 oz
- 17 pairs Disposable Gloves
- 120 ft 18 Gauge Copper Wire
- 10 ft Waxed Paper
- 5 Disposable 2" brushes
- 10 Foam rollers
- 1 Roller tray
- 1 Roller handle
- 5 spatulas (2")
- 1 Small artists' brush
- 25 Tongue depressors
- 10 Miniature tongue depressors
- 5 Heavy Duty Ziploc bags
- 17' Neoprene sealing strips
- 2oz Bronze ring nails
- 40' Nylon 3/4" Webbing
- 10 Quick release buckles
- 2 screws (2")
- 2 round hatches (5") plus hardware
- 20 stainless screws (3/4")
- 20 finishing washers (3/4")
- 2 epoxy spreaders (10")
Need Help Building it?
We’re here to help with any questions you might have during the build process.
