PocketShip Base Kit

The PocketShip Kit includes:

• Hull panels, bulkheads, decks, keel, rudder, centerboard, and all plywood components.  All parts are CNC-cut from BS1088 okoume marine plywood in 6mm and 9mm thicknesses.  Hull panels feature "puzzle joints" for rapid and accurate assembly.  The transom is cut from BS1088 18mm (3/4") dark sapele marine plywood.
• Hull panels and bulkheads are pre-drilled on the CNC machine for assembly with wire stitches.
• Patterns for nearly all of the solid timber parts, CNC-cut from lauan or similar material, ready to trace onto timber.
• CNC-cut parts for the building cradle
• 10 gallons of MAS marine epoxy resin
• 4 gallons of MAS slow hardener
• 1 gallon of MAS fast hardener
• 25 pounds of epoxy thickeners
• 50 yards of 6-ounce x 50" fiberglass fabric
• 50 yards of 9-ounce x 3" fiberglass tape
• 11 pages of architectural drawings and 280-page manual.

Solid timber parts (spars, rails, stringers), lead ballast, hardware, rigging, and sails are not included in this kit.

PocketShip kits will be shipped via common carrier on a pallet weighing approximately 750 pounds.  Shipping costs will vary;  we will email you with a shipping quote once we have your complete shipping address.  Of course, you may pick up your PocketShip kit at our showroom in Annapolis, MD.