Overview
206 Slow Hardener® is a low-viscosity epoxy curing agent for use when extended working time or a longer cure time is needed. It also provides adequate working time at higher shop temperatures. When combined with 105 Epoxy Resin® in a five-part epoxy resin to one-part hardener ratio, the cured 105 Epoxy Resin/206 Slow Hardener mixture yields a rigid, high-strength, moisture-resistant solid bond with excellent bonding and barrier coating properties. The mix ratio is 5 parts resin to 1 part hardener by volume. 206 Slow Hardener is not intended for clear coating.
PROJECT USES:
- Marine
- Boat Repair
- Bonding
- Fabrication
- Barrier Coating
CURE TIME:
- Pot life (100 grams cupful):
- At 72°F (22°C): 20 to 25 minutes
- Working time (thin film):
- At 72°F (22°C): 90 to 110 minutes
- Solid state:
- At 72°F (22°C): 10 to 15 hours
CURE TEMP:
- Minimum: At 60°F (16°C)
Pumps West System 300 Mini Pump Set
*This product is one part of a two-part epoxy compound. Make sure that you are ordering both Resin AND Hardener.
* International Customers: we do not ship this product outside the US.
WARNING This product can expose you to chemicals including, propylene oxide, which is known to the State of California to cause cancer. For more information go to www.P65Warnings.ca.gov.
We Also Recommend
Need Help Building it?
We’re here to help with any questions you might have during the build process.
